DC53

Update：2018/7/22 19:54:08 View：4992

Type： DC53
Description：
DC53

Introduction

Description

DC53 Cold Work Tool Steel Flat Bar

Equivalence

AISI / SAE	DIN / W.Nr	JIS	GB	Daido
~D2	~1.2379	~SKD11	~Cr12Mo1V1	DC53

Chemical Composition (%)

Steel Grade	C	Si	Mn	P	S	Cr	Mo	V
DC53	0.90 1.05	0.80 1.10	0.20 0.50	≤ 0.030	≤ 0.030	7.80 8.50	1.80 2.10	0.15 0.35

Dimensions

Shape	Thick (mm)	Width (mm)
Hot Rolled	6-200	20-910
Forged	150-400	200-1000

Delivery Condition

EAF+LF+VD+(ESR), Hot rolled or Forged, Annealed, Hardness≤255HB,Unmachined or Machined,

UT 100% Passed

Characteristics

DC53 is a new general-purpose cold work die and mold steel whose strength and toughness approach those

of high-speed steels.

DC53, is an improvement over alloy tool steel D-2 specified in Standard (JIS) G4404. It eliminates the disadvantages

of insufficient hardness and toughness, resulting from high-temperature tempering found with D-2, and is intended to replace D-2 in use for general purpose and precision dies.

Higher hardness (62-64 HRc) than D2 after heat treatment.

Twice the toughness of D2 with superior wear resistance.

Substantially higher fatigue strength compared to D2.

Smaller primary carbides than D2 protect the die from chipping and cracking.

Secondary refining process (DLF) reduces impurities.

Machines and grinds up to 40% faster than D2.

Less residual stress after wire EDMing.

Applications

It is used for making stepped punch and press-punching dies, concrete sprayer parts, rotor plates

swaging dies and backers, dies for cold forging, thread-rolling circular dies, piercing punch, thread-rolling dies for

heat-treated bolts, forming dies, stripper plates for lead frame blanking, gauges, screws for injection molding

machines and plastic molds as well.

More Products